SAMA MAHIR SDN. BHD.Casting & engineering · Johor, Malaysia

Aluminium · Johor, Malaysia

Aluminium casting in Malaysia: gravity die and sand casting

Need aluminium housings, plates, brackets or covers made properly, in small or repeat batches? We cast them in a steel die or in sand, then machine them on our own CNC machines. We've priced more than 200 aluminium casting jobs for 56 companies.

A CNC-machined aluminium base plate cast by Sama Mahir
A cast aluminium base plate after CNC machining.
  • Since 1972Five decades in metal casting, family-run
  • 1.5 tMelting capacity: two 750 kg furnaces
  • 3 CNCPinnacle machining centres on site
  • ISO 9001Quality system certified by SOCOTEC

Which process suits your part

We'll recommend one from your drawing and quantity. In short:

Gravity die casting

Metal poured into a permanent steel die: a denser part, a finer surface and a repeatable size. Walls down to 3–4 mm. The natural choice once a design is settled and orders repeat.

Sand casting

No die to pay for, so it suits prototypes, low quantities and larger parts.

Investment casting

Fine detail cast in rather than machined. It needs a high minimum order quantity, so it's for larger runs.

What we don't do, so you know up front

No high-pressure die casting (HPDC)

Parts that need walls thinner than 3–4 mm, or very high volumes, belong in an HPDC plant. We'll tell you straight away if that's your part.

No anodising in-house

We don't anodise. We can help you look for an anodiser, or you can arrange it yourself after machining.

Big parts: ask first

Machining goes up to about 1100 × 600 mm and 1,000 kg. For anything larger, send the drawing and we'll check.

Our work

Aluminium parts we've made

Photos of parts we have made. Customer names and part numbers are left out.

At a glance

Aluminium casting at a glance

AlloysLM25, LM6, A356, ADC12, A380
ProcessesGravity die (walls down to 3–4 mm), sand, investment (high minimum order quantity)
Machining3 × Pinnacle LV117 CNC machining centres, parts up to about 1100 × 600 mm and 1,000 kg
ChecksDimensional, material and hardness testing; documented records; ISO 9001:2015
Not offeredHigh-pressure die casting, anodising

How it works

From drawing to aluminium parts

Your quote gives the lead time for your part; these are typical times.

  1. Send your drawing

    A drawing or 3D model, or a sample or photos with sizes, plus the metal and the quantity.

  2. Review and quote

    Our engineers check it for casting and machining, and quote the pattern, the casting and any machining.

  3. Pattern and first samples

    We make the pattern and cast first samples for your approval.About 3–4 weeks

  4. Production

    We cast, machine, inspect and pack your parts.A full container in about 6–8 weeks

FAQ

Questions buyers ask

Do you do high-pressure die casting (HPDC)?

No. We do gravity die, sand and investment casting. If your part needs HPDC, we'll tell you when we see the drawing.

What is the thinnest wall you can cast?

About 3–4 mm in gravity die casting. Thinner walls usually need high-pressure die casting, which we don't do.

Which aluminium alloys do you cast?

LM25, LM6, A356, ADC12 and A380. If your drawing calls for another alloy, ask us before you order.

Can you anodise the parts?

Not in-house. We can help you look for an anodiser, or you can arrange it yourself.

Is a die worth it for my quantity?

A steel die costs more than a sand pattern, but on repeat orders it gives a denser part with a finer surface. Tell us your yearly quantity and we'll advise which suits, or price both.

Quality

Checked as it's made, and certified

Sama Mahir's ISO 9001:2015 certificate

ISO 9001:2015 certified

Certified by SOCOTEC Certification International. Certificate SCS 101457Q, valid to 7 April 2028.

  • Dimensional inspection against your drawing
  • Material and hardness testing
  • In-process checks at every stage
  • Documented quality records
Download the certificate (PDF)

Our clients

Trusted by leading manufacturers

We're proud to have supplied leading names across manufacturing and engineering.

  • Mazak Optonics logo
    Mazak Optonics
  • Panasonic logo
    Panasonic
  • Flextronics logo
    Flextronics
  • Lum Chang Creations logo
    Lum Chang Creations
  • Epson logo
    Epson
  • Philips logo
    Philips
  • TECO Westinghouse logo
    TECO Westinghouse
  • NatSteel logo
    NatSteel
  • Leica Geosystems logo
    Leica Geosystems
  • ASTI logo
    ASTI
  • Baker Hughes logo
    Baker Hughes
  • Bucher Emhart Glass logo
    Bucher Emhart Glass

Send one drawing. We'll reply with a price and a lead time.

A photo with dimensions, or a sample, works too. To price it, we need:

  1. The drawing (2D PDF and/or 3D STEP), or photos with sizes
  2. The material
  3. The rough size or weight
  4. Whether there's a sample we can refer to
  5. The quantity, per order or per year
Ryan Tan
Ryan TanBusiness and Development Manager. Your contact for quotes, from the first message to the order.
WhatsApp RyanGet a quote