Sand casting · Masai, Johor
Sand casting in Malaysia, from one prototype to a full container
Your part is too big, too complex or needed in too few pieces for a die. That is what sand casting is for, and it's the process our company was founded on in 1972. Send one drawing and we'll reply with a price and a lead time.

- Since 1972Five decades in metal casting, family-run
- 1.5 tMelting capacity: two 750 kg furnaces
- 3 CNCPinnacle machining centres on site
- ISO 9001Quality system certified by SOCOTEC
Why sand casting, and why with us
No die to pay for
A sand mould is made from a pattern, and a pattern costs much less than a steel die. That makes one-off parts, prototypes and small batches worth casting.
Big, heavy or awkward shapes
Sand takes thick sections, deep cores and shapes a die can't. Our two 750 kg furnaces give us 1.5 t of melting capacity.
Your pattern, or ours
Our own pattern shop makes and looks after your pattern, so a change doesn't wait on anyone else. Already have a pattern? We can cast on it.
Most metals
Grey and ductile iron, carbon and low-alloy steel, stainless and duplex, aluminium, brass, bronze and gunmetal.
Machined before it leaves
Castings are machined on our three Pinnacle CNC machining centres, for parts up to about 1100 × 600 mm and 1,000 kg.
Checked as it's made
Dimensional, material and hardness checks, in-process checks and documented records, under our ISO 9001:2015 quality system.
Proof
Repeat sand-casting work

Machinery · Penang
Brackets and machine bases for an equipment maker
- Material
- Grey cast iron, ASTM Class 25 and Class 30
- Our work
- Cast on the customer's own pattern, then CNC-machined; machine bases added in 2026
- Orders
- Repeat orders since 2022
Our work
Parts from our floor
A few of the castings we've made and machined, in iron, aluminium and bronze.

Spoked pulley wheel 
Finned motor housing 
Aluminium vaned rotor 
Aluminium brackets, as cast, with risers still on
Photos of parts we have made. Customer names and part numbers are left out.
How it works
From your drawing to castings, in four steps
Your quote gives the lead time for your part; these are typical times.
Send your drawing
A drawing or 3D model, or a sample or photos with sizes, plus the metal and the quantity.
Review and quote
Our engineers check it for casting and machining, and quote the pattern, the casting and any machining.
Pattern and first samples
We make the pattern and cast first samples for your approval.About 3–4 weeks
Production
We cast, machine, inspect and pack your parts.A full container in about 6–8 weeks
At a glance
Sand casting at a glance
| Metals | Grey iron FC150–FC400 · ductile iron (FCD) · carbon and low-alloy steel · stainless 304 / 316 · duplex · aluminium LM25 / LM6 / A356 · brass, bronze, gunmetal, aluminium bronze |
|---|---|
| Melting | Two 750 kg furnaces (1.5 t melting capacity) |
| Patterns | Made and kept in our own pattern shop, or we cast on your existing pattern |
| Machining | 3 × Pinnacle LV117 CNC machining centres, parts up to about 1100 × 600 mm and 1,000 kg |
| Quality | ISO 9001:2015, certified by SOCOTEC (certificate SCS 101457Q) |
| Lead time | Pattern and first samples in about 3–4 weeks; a full container in about 6–8 weeks |
FAQ
Questions buyers ask
Can you cast just one piece?
Yes. Sand casting suits single pieces and prototypes, because the pattern is the only tooling. Very small jobs carry a minimum charge, and we'll tell you up front.
Sand casting or gravity die casting: which do I need?
Sand casting has the lowest tooling cost and takes bigger, more complex parts. Gravity die casting uses a steel die, so it pays off once a design is settled and orders repeat, and it gives a finer surface. Send the drawing and quantity, and we'll recommend one.
What do you need for a quote?
A drawing (2D PDF and/or 3D STEP), or photos with sizes, or a sample; the material; the rough weight; and the quantity per order or per year.
Can you machine the castings too?
Yes. We machine them on our own CNC machining centres, so the machining allowance is planned when the mould is designed and the parts arrive ready to fit.
Where is the foundry?
No. 8, Jalan Sri Plentong 6, Kawasan Perindustrian Sri Plentong, 81750 Masai, Johor. We're renovating and expanding the plant; visitors are welcome, just tell us when you're coming.
Quality
Checked as it's made, and certified
ISO 9001:2015 certified
Certified by SOCOTEC Certification International. Certificate SCS 101457Q, valid to 7 April 2028.
- Dimensional inspection against your drawing
- Material and hardness testing
- In-process checks at every stage
- Documented quality records
Our clients
Trusted by leading manufacturers
We're proud to have supplied leading names across manufacturing and engineering.

Mazak Optonics 
Panasonic 
Flextronics 
Lum Chang Creations 
Epson 
Philips 
TECO Westinghouse 
NatSteel 
Leica Geosystems 
ASTI 
Baker Hughes 
Bucher Emhart Glass
Send one drawing. We'll reply with a price and a lead time.
A photo with dimensions, or a sample, works too. To price it, we need:
- The drawing (2D PDF and/or 3D STEP), or photos with sizes
- The material
- The rough size or weight
- Whether there's a sample we can refer to
- The quantity, per order or per year

Explore
